Checking Your Air Conditioning System before Seeking Professional Repair

Checking Your Air Conditioning System before Seeking Professional Repair

Most households rely on heating systems for efficient household heat. This calls for proper monitoring of these systems to ensure appropriate and cost-effective use. Even if you have a secondary heat source, the primary sources should be kept in check to avoid enormous costs of installing new ones.

The standard components of heating systems are the air conditioners. If they are damaged, the performance of the whole plumbing line goes into a halt. But you can seek professional help from an HVAC company to fix an air conditioner problem. For instance, ac repair Fort Myers FL companies will address not only the air conditioning issue but also any problem in the plumbing and heating systems. Although you can hire a contractor in case your ac malfunctions, you can still observe some do-it-yourself tips to ensure proper performance.

Is the AC Remaining Hot? Power Off and Clean the Furnace and Condenser

If the AC is not yet cooling – even after switching off external power supply – you might be forced to perform manual cleaning. Before you clean, it is critical to ascertain that the power is off by checking the voltage switch of the electrical box. Make a point of cleaning the furnace filter as well.

After taking care of the power inlet and the furnace, check the condenser coils. The chances are that the condenser filters are clogged due to the insufficient air supply. At this point, consider changing the filter, turn off the thermostat, and turn on the fan switch. After about half an hour, turn on the AC; watch its operational effects for 12 hours, the problem is fixed if there are no abnormalities within this period.

Is the Fuse in Proper Condition?

If the AC isn’t cooling your home, it might as a result of a blown fuse. A blown fuse needs immediate replacement, and you can call a specialist to perform the replacement. In the disconnect block, a positive number (other than zero) indicates the fuse is in good form. On the other hand, an infinite sign or a negative number means your fuse is blown.

Sometimes, the fuse can still blow up again after a replacement. This is an indication that the condensing unit has a problem. In such a case, call an expert to fix the whole issue.

Check the Capacitor

You can also discharge a capacitor, identify a problem, and install a new one. Though this capacitor handling procedure can be an uphill task, technical-savvy people will find it appealing. Here, disconnect the terminals marked ‘H’ ‘C’ and ‘F’. Afterward, establish any damage to the insulation wires caused by burrowing rodents. Ensure the capacitor is discharged before handling the electronic components. If you can safely perform the repairs, go ahead. But if not, call a professional contractor.

Apart from the furnace, condenser, capacitor, and fuse, you can as well check the contractor and the fan motor. Note that you are dealing with electrical components so switching off power supply is essential. Besides, certified contractors are ready to help you in fixing the air condition system.…